Aluminum Gates in Los Angeles: Side Yard, Driveway and Rolling
Rust-free aluminum gates built to your opening and installed by our own crews, from the Westside to Ventura County.
An aluminum gate is the gate to choose when the fence is aluminum, when the gate sits by a pool, or when you want a black gate that will never need paint. We build pedestrian gates for side yards and front walks, swing gates for driveways, and rolling gates where a swing gate has no room to open. Each one comes in the same colors as our aluminum fencing, White, Woodland Gray, Textured Black, Monument Gray and Walnut, so the gate and the fence read as one piece. Vinyl Fence Depot has installed fences and gates in Los Angeles since 1994. California contractor license 836988. Every aluminum gate is built to your measurements in our Van Nuys facility and installed by one of our seven in-house crews, and an in-house project manager inspects the job. Our Santa Clarita showroom covers the north of the county.
Get a free quote
Tell us about your project and we will be in touch to book your free on-site estimate.
Styles, heights and colors
Aluminum gates follow the two looks of the aluminum fence line. Semi-privacy gates use horizontal slats, 2.56 inches or 6 inches wide, with a gap between each one. Privacy gates use the same slats set tight, with no gap. A pedestrian gate matches the fence it sits in. A driveway gate is built on an all aluminum frame, so there is no steel inside to rust, and a rolling gate runs on a ground track along the inside of the fence line.
- Aluminum pedestrian gate: a single leaf for a side yard, a front walk or a pool enclosure, in semi-privacy or privacy.
- Aluminum horizontal semi-privacy gate: 2.56 inch or 6 inch slats with even spacing, the most common look.
- Aluminum privacy gate: 2.56 inch or 6 inch slats with no gap, for a side yard you want closed off.
- Aluminum swing driveway gate: single or double leaf, with drop rods on a double gate so one side can stay shut.
- Aluminum rolling gate: moves sideways along a ground track, for a short driveway or a sloped apron.
Gates are built to the height of the fence and the width of your opening. A swing gate can be up to 12 feet per leaf, and a double gate covers a wider driveway. A pool gate must be at least 60 inches tall under California pool safety requirements, with a self-closing, self-latching mechanism and no footholds a child can use. Every driveway and rolling gate is built motor-ready.
Five colors: White, Woodland Gray, Textured Black, Monument Gray and Walnut. Walnut comes in the 6 inch slat, in privacy and semi-privacy. The metal is structural grade 6005-T5 alloy, powder coated to AAMA 2604. Hinges and latches are stainless steel, powder coated, with the self-closing spring built in. Hardware is black on Woodland Gray, Textured Black, Monument Gray and Walnut gates. A White gate can have white or black hardware. Our vinyl gates do not come in black; our aluminum gates do.
How it works
Free on-site estimate
We come out to your property, measure, walk you through styles, heights and colors, and give you a written quote. There is no charge and no obligation.
Agreement and 10 percent deposit
You sign and pay a 10 percent deposit, and the remaining 90 percent is due on completion. On custom projects that take more than one day, we may request a progress payment.
Installation
Your order is built to your measurements and our crew installs it, then cleans up the work area before leaving.
Most installs in one day
Most installations are finished in a single day. If yours will take longer, we tell you up front when we schedule it.
What affects the price
Width and height
A wider or taller gate carries more weight, so it needs a heavier frame and stronger hinges, and a double swing or rolling gate costs more than a single pedestrian gate.
Style
A privacy gate uses more material than a semi-privacy gate.
Hardware
Hardware adds up, since a keyed lock or a drop rod set costs more than the standard latch.
The ground
Cutting into concrete for posts, fitting a gate into an existing block wall, working on a sloped apron, or removing an old iron gate all take time, and a rolling gate needs a level run for its track.
Access
How close our crew can park to the opening affects time on site.
The free on-site estimate turns all of this into a written quote.
Areas we serve
Van Nuys showroom
14700 Oxnard Street, Van Nuys, CA 91411 (818) 989-9940Serves Los Angeles County
Santa Clarita showroom
26210 Bouquet Canyon Road, Santa Clarita, CA 91350 (661) 259-1900Serves north Los Angeles County and most of Ventura County
Common questions
No. Aluminum has no iron in it, so it cannot rust, which is why it suits pool gates and gates that sprinklers reach every morning. Upkeep is soap and water. The powder coat finish is warranted for 25 years against peeling, cracking, blistering and loss of adhesion, and for 15 years on color and gloss retention. The aluminum structure carries a limited lifetime warranty for the original purchaser, and our own 5 year craftsmanship warranty covers the installation.
Every aluminum driveway gate, swing or rolling, is built motor-ready.
Our aluminum pool gates follow California's barrier rules: 60 inches or taller, a gate that closes and latches by itself, and nothing a child can use as a step. Your city may have its own rules; we check that at the estimate.
Usually. Show the estimator a photo at the free on-site visit. We build to order, so we can match the slat width, the height and one of our five colors. An exact match to a faded finish from another maker cannot be promised.
It starts with a free on-site estimate and a written quote. You sign and pay a 10 percent deposit, and the remaining 90 percent is due on completion. On custom projects that take more than one day, we may request a progress payment. Lead time runs from 2 days to 5 weeks, depending on the time of year and whether the product is in stock. The gate is built to your measurements in Van Nuys, then our own crew sets the posts and hangs it. Most gates are finished in a day.
California's new Zone 0 wildfire rules, now in final state review, will limit new combustible fences and gates within five feet of a home in certain fire hazard areas. At your free estimate we check your property's fire zone and how close the gate sits to the house, then walk you through the options.
Ready for your free estimate?
We will measure, show you the options and give you a written quote.

